Drones
SwitchBlade-Elite
-
These manuals intend to inform and educate the user on how to properly and effectively control, fly, and utilize the full functionality of your Vision Aerial UAS. It is not recommended to operate and fly your Vision Aerial UAS without first reading and understanding the information and guidelines presented in this document.
Requirement for Compliance
Shall: Application of a procedure is mandatory.
Should: Application of a procedure is recommended.
May: Application of a procedure is optional.
Will: Indicates futurity.
Requirement for Landing
Land as soon as practicable: Extended flight is not recommended, duration is at the discretion of the operator.
Land as soon as possible: Land at the nearest safe site where a landing can be made.
Land immediately: Execute a landing without delay.
-
-
-
-
SwitchBlade-Elite 2.5 Release Notes, 8/19/2024
Connector Interface
New Fischer connector as the primary connector for all payloads.
Both HDMI cables are now accessible – one in the back for primary payloads and one in the front for FPV cameras.
Barrel connector in the front for FPV camera power.
General
1.1 air units with ethernet connection wired to Fischer connector.
Increased durability of connector bridge threads.
Updated headlight assembly now includes FPV camera mounting as standard on all systems.
Extended feet are now standard on all SwitchBlade-Elite’s.
Provisional wiring on all SwitchBlade-Elite’s for top mounted accessories.
General improvements that allow for new payload integrations.
USA flag on tail plates.
-
Please contact Service & Support to get service bulletins relevant to your drone.
-
Disclaimer & Warning
Please read this disclaimer and warning carefully and review the Vision Aerial UAS product manual prior to flight.
By using a Vision Aerial UAS, you acknowledge that you have read, understand, and agree to this disclaimer. You agree that you are solely responsible for your conduct while using your Vision Aerial system, and for any direct or indirect consequences that may result from its use. You agree to only use the SwitchBlade-Elite or Vector for proper purposes that are in accordance with all local, state, and federal rules and regulations.
Vision Aerial UAS are not toys and should be operated with extreme care, as improper operation can cause damage to property, serious personal injury, or death.
As with any multi-rotor aircraft, the SwitchBlade-Elite and Vector are precise and technical machines. Novice pilots should invest sufficient time on a flight simulator and seek training from an experienced pilot before operation. The product manual and a flight simulator are no substitute for training with an experienced pilot, particularly when it comes to learning how to safely operate your Vision Aerial UAS. Novice pilots should never fly without the supervision of an experienced pilot.
✔ Always check the UAS and its components prior to operation.
✔ Always maintain a safe distance from the UAS when in use.
✔ Never attempt to touch the UAS when the rotors are moving.
✔ It is strongly recommended not to fly the UAS over or around people, near power lines, or any other difficult-to-see obstacles.
✔ Never fly the UAS near manned aircraft of any kind.
✔ Never fly with any rotors that have visible imperfections or damage.
✔ Always keep children and animals a safe distance away from the UAS when in use.
✔ Only use rotors supplied by Vision Aerial that are designed for use on your Vision Aerial UAS.
✔ Always remove the rotors when making a hardware change to prevent rotor strikes in the event of unintentional motor starts.
Safety
It is your responsibility to learn how to safely operate your Vision Aerial UAS and to adhere to all applicable rules and regulations.
Fly at your own risk.
Vision Aerial systems are tuned with custom components selected for each application. Modification to, removal, or substitution of components will void the warranty and can lead to unsafe operating conditions.
Vector
-
These manuals intend to inform and educate the user on how to properly and effectively control, fly, and utilize the full functionality of your Vision Aerial UAS. It is not recommended to operate and fly your Vision Aerial UAS without first reading and understanding the information and guidelines presented in this document.
Requirement for Compliance
Shall: Application of a procedure is mandatory.
Should: Application of a procedure is recommended.
May: Application of a procedure is optional.
Will: Indicates futurity.
Requirement for Landing
Land as soon as practicable: Extended flight is not recommended, duration is at the discretion of the operator.
Land as soon as possible: Land at the nearest safe site where a landing can be made.
Land immediately: Execute a landing without delay.
-
-
-
-
Vector 2.5 Release Notes, 8/1/24
Vector 2.5 is now available for general use. This update includes new extended feet for improved stability, an Ethernet connection to the air unit, and a refined connector interface with Fischer Connector, along with dedicated power and video input ports. Other enhancements include FPV power and video input ports, air unit relocation, standardized FPV camera mounting, and larger grommets for easier wire routing, ensuring a smoother and more efficient user experience.
What’s New
New Connector Interface with Fischer Connector, Dedicated Power Connector, and Video Input
New FPV Power and Video Input Ports
Air Unit Relocation
Standardized FPV Camera Mounting
Increased Grommet Size for Easier Wire Routing
Extended Feet
Ethernet Connection to Air Unit
-
-
Disclaimer & Warning
Please read this disclaimer and warning carefully and review the Vision Aerial UAS product manual prior to flight.
By using a Vision Aerial UAS, you acknowledge that you have read, understand, and agree to this disclaimer. You agree that you are solely responsible for your conduct while using your Vision Aerial system, and for any direct or indirect consequences that may result from its use. You agree to only use the SwitchBlade-Elite or Vector for proper purposes that are in accordance with all local, state, and federal rules and regulations.
Vision Aerial UAS are not toys and should be operated with extreme care, as improper operation can cause damage to property, serious personal injury, or death.
As with any multi-rotor aircraft, the SwitchBlade-Elite and Vector are precise and technical machines. Novice pilots should invest sufficient time on a flight simulator and seek training from an experienced pilot before operation. The product manual and a flight simulator are no substitute for training with an experienced pilot, particularly when it comes to learning how to safely operate your Vision Aerial UAS. Novice pilots should never fly without the supervision of an experienced pilot.
✔ Always check the UAS and its components prior to operation.
✔ Always maintain a safe distance from the UAS when in use.
✔ Never attempt to touch the UAS when the rotors are moving.
✔ It is strongly recommended not to fly the UAS over or around people, near power lines, or any other difficult-to-see obstacles.
✔ Never fly the UAS near manned aircraft of any kind.
✔ Never fly with any rotors that have visible imperfections or damage.
✔ Always keep children and animals a safe distance away from the UAS when in use.
✔ Only use rotors supplied by Vision Aerial that are designed for use on your Vision Aerial UAS.
✔ Always remove the rotors when making a hardware change to prevent rotor strikes in the event of unintentional motor starts.
Safety
It is your responsibility to learn how to safely operate your Vision Aerial UAS and to adhere to all applicable rules and regulations.
Fly at your own risk
Vision Aerial systems are tuned with custom components selected for each application. Modification to, removal, or substitution of components will void the warranty and can lead to unsafe operating conditions.
Ground Control Station (GCS)
Herelink GCS
-
Many day-to-day operations are performed within the Vision Aerial Flight Deck mission planning and flight software and you will not need the Herelink controller user guide.
Also see Ground Control Station and Flight Controls sections of the SwitchBlade-Elite Flight Manual or the Vector Flight Manual.
For advanced functions, see the Herelink ground control station user guide.
-
For Flight Deck, see Software & Accessories ⇣
Software & Accessories
Software
-
What’s New in Flight Deck 3.0 ⇢
Flight Deck 3.0.24 Update ⇲ Release Notes, Installation instructions, and APK download
-
-
Accessories
-
-
-
-
All gimbals sold with Vision Aerial products are weighted, balanced, and integrated prior to shipment and should not require the user to perform specific tasks.
Gremsy gimbals come with a quick connect feature, however Vision Aerial advises users to use the Vision Aerial Payload Connection System for attaching and removing gimbals to avoid known issues.
Contact Service & Support for additional help.